DL S 515/1500 - Designed for large workpieces, with powerful motor and with rapid feed on X and Z axes
DL S 515/1500 - Designed for large workpieces, with powerful motor and with rapid feed on X and Z axes

DL S 515/1500

SKU : 301514

The DL S lathe series is slightly smaller than the DL E Heavy, but is also designed for large turning diameters and workpiece lengths. It is the solution for conventional machining of workpieces up to 5000 mm (197 in.) in length and over 720 mm (28 in.) in diameter. The particularly wide and heavily ribbed machine bed accommodates the heavy workpiece weights. The multi-disc clutch gives the operator control over the dynamics of the spindle start-up and the rapid traverse in the support is particularly effective with large bed lengths.

  • Center widths up to 197 in.
  • Spindle bore of 4 in.
  • Powerful motor
  • Spindle speed can be adjusted in 4 steps
  • Rapid feed in X and Z direction
  • Complete with assembled 3-axis position indicator
Working Area
Workpiece length (max.) 59 in
Turning diameter over bed 39 in
Turning-Ø over support 28 in
Turning diameter over gap bridge 53 in
Workpiece weight (max.) 8800 lbs
Gap bridge length 19 in
Bed width 24 in
Travels
Travel X-axis 20.5 in
Travel Z-axis 47 in
Travel Z1-axis 10 in
Swing range of top slide 90°
Headstock
Spindle speed 5 rpm - 630 rpm
Spindle bore 3.9 in
Spindle mount A2-11
Rapid Feed
Rapid feed X-axis 70.87 in/min
Rapid feed Z-axis 143.31 in/min
Feed
Feed speed X-axis 0.0016 in/min - 0.189 in/min
Feed speed Z-axis 0.0031 in/min - 0.378 in/min
Feed speed Z1-axis 0.0008 in/min - 0.0945 in/min
Tool Head
Tool shank dimensions 1.3 in x 1.3 in
Threading
Threading, metric (53) 1-120 mm
Threading - inch (49) 30 - 1/4
Threading, diametric (56) 60-05 DP
Threading, module (54) 05 - 60 mm
Tailstock
Tailstock quill diameter 5 in
Tailstock taper 6 MT
Tailstock quill stroke 10 in
Drive Capacity
Motor rating main drive 29.5 Hp
Motor rating coolant pump 0.2 Hp
Motor rating feed 1.5 Hp
Measures and Weights
Overall dimensions (length x width x height) 144 in x 60 in x 63 in
Weight 12320 lbs

  • Extra heavy, wide machine bed with heavy ribbing and mono-block construction
  • Induction-hardened and ground guide slots ensure long-term accuracy and minimum wear
  • Massive headstock with high-precision main spindle on a tapered roller bearing with 4 inch spindle bore for excellent stability under heavy loads
  • Very quiet operation at maximum spindle speed
  • Joystick control for X and Z feeds is mounted directly to support
  • Manually shifted 4-step gearbox with hiqh-quality frequency control combined with a powerful main spindle motor allow exact tuning of rpm and high torque to provide maximum power even under heaviest loads
  • For quick positioning and reduced down-time, the support is equipped with a rapid feed on X- and Z-axes
  • Adjustable overload clutch in apron protects the feed mechanics from damage and failure
  • Central, practical controls for feeds and thread leads
  • The auxiliary gearbox features a wide spectrum of diametric, inch, module, and metric threads
  • Support and top slide are designed for high cutting forces
  • More accuracy
  • Lower error rate
  • Increased productivity
  • Resulting in valuable time savings
  • For increased productivity
  • Easy to read display
  • Operator-specific features
  • Convenient keyboard layout
  • Resolution: 0.0004 / 0.0002"
  • Default coordinates
  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Calculator function
  • Storage for 10 tools
  • Radius / diameter toggle
  • Mm/inch conversion
  • Easy expansion and maintenance-free operation
  • Display for top (Z0) and box way slide (Z1) both separate and in differential / cumulative mode for lathes

3-axis position indicator X.Pos 3.2 SKU:
  • New generation position indicator with integrated turning functions
3-axis position indicator X.Pos 3.2
3-axis position indicator X.Pos 3.2 SKU:
  • New generation position indicator with integrated turning functions
4-jaw face plate chuck Ø 40"
4-jaw face plate chuck Ø 40" SKU:
  • independent4 jaw chuck 
  • size of Ø 39.37 in
  • made of cast iron
  • delivered with one set of hard jaws
4-station tool holder
4-station tool holder SKU:
  • classic 4 station tool holder
  • section size 45×45
Dead centers
Dead centers SKU:
Reducing sleeve
Reducing sleeve SKU:
Chuck guard
Chuck guard SKU:

Chuck guard with integrated interlock system

Protective shield for the toolpost
Protective shield for the toolpost SKU:
Coolant system
Coolant system SKU:
Foundation bolts
Foundation bolts SKU:
Work lamp
Work lamp SKU:
Operating tools
Operating tools SKU:
Operator instructions
Operator instructions SKU:
Motorized tailstock movement
Motorized tailstock movement SKU: 251161
Motorized tailstock movement
3-jaw chuck (20 inch) SKU: 251162
3-jaw chuck (20 inch)
Steady rest (12 - 28 inch) SKU: 251160
Steady rest (12 - 28 inch)

Resources & Downloads

Optional Accessories

Explore the range of compatible accessories in stock

Oil, Coolants and Lubricants Coolant Concentrate 5 Ltr.
SKU : 103184
Lathes accessories Quick-Set Spindle Bore Stop Size 10 3.5-4.3 in
SKU : 103026

Similar Products

DL S 515/5000 - Designed for large workpieces, with powerful motor and with rapid feed on X and Z axes

DL S 515/5000

Turning diameter over bed: 39 in
Workpiece length (max.): 197 in
DL S 515/3000 - Designed for large workpieces, with powerful motor and with rapid feed on X and Z axes

DL S 515/3000

Turning diameter over bed: 39 in
Workpiece length (max.): 118 in
DL S 515/4000 - Designed for large workpieces, with powerful motor and with rapid feed on X and Z axes

DL S 515/4000

Turning diameter over bed: 39 in
Workpiece length (max.): 157 in
DL S 515/5000 - Designed for large workpieces, with powerful motor and with rapid feed on X and Z axes

DL S 515/5000

Turning diameter over bed: 39 in
Workpiece length (max.): 197 in
DL S 515/3000 - Designed for large workpieces, with powerful motor and with rapid feed on X and Z axes

DL S 515/3000

Turning diameter over bed: 39 in
Workpiece length (max.): 118 in
DL S 515/4000 - Designed for large workpieces, with powerful motor and with rapid feed on X and Z axes

DL S 515/4000

Turning diameter over bed: 39 in
Workpiece length (max.): 157 in
consultation

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

DL S 515/1500 - Designed for large workpieces, with powerful motor and with rapid feed on X and Z axes
DL S 515/1500
SKU : 301514
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a service

*
*
*
*
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our service representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.