Optional Accessory Set / ST 130 - Divider Accessories
Optional Accessory Set / ST 130 - Divider Accessories

Product Details

Applications: Workpieces can be clamped between the divider and the tailstock for a horizontal workpiece alignment.

Upgrade to a Universal Divider

Dividing plate set for indirect dividing:

  • The spindle is positioned via dividing plates that have several concentric hole pattern
  • Using so-called shears (two pointers rotating around the crank shaft) simplifies positioning through several crank rotations, since counting between holes on the divider plate is not necessary
  • The user only has to count the number of full rotations
  • Benefit: Many divisions can be performed with only a few divider plates, higher accuracy is achieved by using a reduction worm gear, which causes a high-resolution continued rotation of the crank

Technical Specs

Slot width
0.63 in
Tailstock centre height
5 in

Optional Accessory Set / ST 130

SKU : 110970
Accessory set for ST series dividers consists of an indexer and a tailstock. The indexer is used for indirect separation. Mounted at the location of the hand wheel, it permits a large number of separations, together with transferring the back-gear to the divider. The tailstock with dead center supports long workpieces with vertical setup of the divider.
  • Function expansion

Product Details

Applications: Workpieces can be clamped between the divider and the tailstock for a horizontal workpiece alignment.

Upgrade to a Universal Divider

Dividing plate set for indirect dividing:

  • The spindle is positioned via dividing plates that have several concentric hole pattern
  • Using so-called shears (two pointers rotating around the crank shaft) simplifies positioning through several crank rotations, since counting between holes on the divider plate is not necessary
  • The user only has to count the number of full rotations
  • Benefit: Many divisions can be performed with only a few divider plates, higher accuracy is achieved by using a reduction worm gear, which causes a high-resolution continued rotation of the crank

Technical Specs

Slot width
0.63 in
Tailstock centre height
5 in

Compatible Machines

MF 1 VP - Vertical milling machine featuring automatic feed on X axis, tilt and swivel head, and pneumatic tool clamping

MF 1 VP

Vertical milling machine featuring automatic feed on X axis, tilt and swivel head, and pneumatic tool clamping

Table set up area: 49x9 in
Travel X-axis: 29,9 in
MF 5 VP - With large traverse paths, automatic feed in the X and Y axes, swiveling milling head and pneumatic tool clamping

MF 5 VP

With large traverse paths, automatic feed in the X and Y axes, swiveling milling head and pneumatic tool clamping

Table set up area: 54x10 in
Travel X-axis: 31,5 in
MF 1 P - Ideal entry level milling machine featuring tilt and swivel head, and pneumatic tool clamping

MF 1 P

Ideal entry level milling machine featuring tilt and swivel head, and pneumatic tool clamping

Table set up area: 42x9 in
Travel X-axis: 26,4 in
Servomill® 700 - Servo-conventional model with vertical milling head, swiveling top beam and advanced functions

Servomill® 700

Servo-conventional model with vertical milling head, swiveling top beam and advanced functions

Table set up area: 54x12 in
Travel X-axis: 26,8 in
VHF 3 - With swiveling vertical milling head, automatic feed in the X and Y axes and motorized table height adjustment, horizontal spindle and swivel table

VHF 3

With swiveling vertical milling head, automatic feed in the X and Y axes and motorized table height adjustment, horizontal spindle and swivel table

Table set up area: 52x13 in
Travel X-axis: 39,4 in
VHF 3.2 - With swiveling vertical milling head, automatic servo feed in all axes, horizontal spindle and swivel table

VHF 3.2

With swiveling vertical milling head, automatic servo feed in all axes, horizontal spindle and swivel table

Table set up area: 54x13 in
Travel X-axis: 39,4 in
FPK 4.3 - Our new generation of machine tools with automated feed and infinitely variable spindle drive

FPK 4.3

Our new generation of machine tools with automated feed and infinitely variable spindle drive

Travel X-axis: 19,7 in
Table dimensions: 16x31 in
FPK 6.3 - Our new generation of machine tools with automated feed and infinitely variable spindle drive

FPK 6.3

Our new generation of machine tools with automated feed and infinitely variable spindle drive

Travel X-axis: 23,6 in
Table dimensions: 18x33 in
VHF 2.2 - Universal milling machine with swiveling cutter head, automated feed in X and Y axes, horizontal spindle and extensive standard equipment

VHF 2.2

Universal milling machine with swiveling cutter head, automated feed in X and Y axes, horizontal spindle and extensive standard equipment

Table set up area: 50x11 in
Travel X-axis: 27,6 in
VHF 1.1 - Console milling machine with swiveling milling head, automatic feed in the X-axis, horizontal spindle and swivel table

VHF 1.1

Console milling machine with swiveling milling head, automatic feed in the X-axis, horizontal spindle and swivel table

Table set up area: 39x9 in
Travel X-axis: 21,1 in
UWF 1.2 - With universal milling head, automated feed on all axes and swiveling table

UWF 1.2

With universal milling head, automated feed on all axes and swiveling table

Table set up area: 54x12 in
Travel X-axis: 39,4 in
UWF 3.2 - With universal type milling head, automatic feed on all axis, swiveling table and horizontal spindle

UWF 3.2

With universal type milling head, automatic feed on all axis, swiveling table and horizontal spindle

Table set up area: 54x13 in
Travel X-axis: 39,4 in
UWF 5 - Heavy console milling machine with stable SK 50 spindle in the universal milling head, horizontal milling spindle, as well as swivel table and automatic feed in all axes.

UWF 5

Heavy console milling machine with stable SK 50 spindle in the universal milling head, horizontal milling spindle, as well as swivel table and automatic feed in all axes.

Travel X-axis: 29,5 in
Table dimensions: 52x14 in
UWF 6 - With extended travel on axes, universal type milling head, ISO50 spindle, automatic feed on all axis and swiveling table

UWF 6

With extended travel on axes, universal type milling head, ISO50 spindle, automatic feed on all axis and swiveling table

Travel X-axis: 51,2 in
Table dimensions: 63x14 in
Mark Super SV - Multi-side milling/drilling machine with automated feed in the X axis, automated quill feed and tapping unit

Mark Super SV

Multi-side milling/drilling machine with automated feed in the X axis, automated quill feed and tapping unit

Table dimensions: 31x9 in
Travel X-axis manual / autom.: 19 / 22 in
Mark Super S - Multi-side milling/drilling machine with automated feed in the X axis, automated quill feed and tapping unit

Mark Super S

Multi-side milling/drilling machine with automated feed in the X axis, automated quill feed and tapping unit

Table dimensions: 31x9 in
Travel X-axis manual / autom.: 19 / 22 in
Servomill® UWF 900 - Servo-conventional milling machine with large work area and universal cutter head

Servomill® UWF 900

Servo-conventional milling machine with large work area and universal cutter head

Travel X-axis: 35,4 in
Table dimensions: 49x18 in
consultation

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

SKU :
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a service

*
*
*
*
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our service representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.