Sinus 400/2000 D - Classic design with extensive standard equipment, including 3 axis read out
Sinus 400/2000 D - Classic design with extensive standard equipment, including 3 axis read out

Sinus 400/2000 D

SKU : 490010

Sinus D is the largest series in the universal lathes segment. The construction follows a classic design but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the frictional connection between the motor and the spindle takes place via a manual multi-disc clutch. With integrated functions such as the removable bed bridge, and rapid traverse, this series offers optional solutions for machining long workpieces or large flanges.

  • One-piece heavy-duty cast bed for increased rigidity
  • Sturdy headstock design with large spindle bearings
  • Rapid feed on 2 axes for fast positioning
  • Well-designed safety functions
Working Area
Workpiece length (max.) 79 in
Turning diameter over bed 31 in
Turning-Ø over support 22 in
Turning diameter without gap bridge 41 in
Gap bridge length 13 in
Bed width 16 in
Travels
Travel X-axis 16.5 in
Travel Z1-axis 9 in
Swing range of top slide 70°
Headstock
Spindle speed 25 rpm - 1600 rpm
Spindle bore 4.1 in
Spindle mount D1-8
Spindle taper 5 MT
Rapid Feed
Rapid feed X-axis 78.74 in/min
Rapid feed Z-axis 157.48 in/min
Feed
Feed X-axis 0.00087 in/R - 0.02913 in/R
Feed Z-axis 0.00173 in/R - 0.05827 in/R
Threading
Threading, metric 0.45 mm - 120 mm
Threading, diametric 0.88 DP - 160 DP
Threading, module 0.25 mm - 60 mm
Threading, whitworth (54) 7/16 - 80 TPI
Tailstock
Tailstock quill diameter 4 in
Tailstock taper 5 MT
Tailstock quill stroke 9 in
Tailstock traverse adjustment ± 11 in
Drive Capacity
Motor rating main drive 10.1 Hp
Measures and Weights
Overall dimensions (length x width x height) 148 in x 45 in x 76 in
Weight 7700 lbs

  • Removable bridge for machining of large parts
  • High accuracy and low-noise operation even at high cutting power
  • Heavy and large bed
  • Hardened guide ways (>HB 400)
  • 4 inch spindle capacity for machining of large parts
  • Manual central lubrication
  • Clutch for soft startup with heavy parts
  • Automatic lubrication of headstock and main drive
  • Protected lead screw
  • Overload protection for feed shaft and lead screw
  • Support moves in linear and cross directions via rapid feed

3-jaw chuck Ø 12 inch SKU:
  • self-centering 3 jaw chuck
  • size of Ø 12 in
  • made of cast iron
  • delivered with one set of hard jaws
3-jaw chuck Ø 12 inch
3-jaw chuck Ø 12 inch SKU:
  • self-centering 3 jaw chuck
  • size of Ø 12 in
  • made of cast iron
  • delivered with one set of hard jaws
Operator instructions
Operator instructions SKU:
Dead center
Dead center SKU:
Chuck guard
Chuck guard SKU:

Chuck guard with integrated interlock system

Reducing sleeve
Reducing sleeve SKU:
Quick tool changer head WD
Quick tool changer head WD SKU:

High quality German type quick change tool holder to easily switch the tools with a repeat accuracy of 0.0004 in.

Fixed splash guard (wall)
Fixed splash guard (wall) SKU:
Quick change tool holder WD1D 40180
Quick change tool holder WD1D 40180 SKU:
3-axis position indicator X.Pos 3.2
3-axis position indicator X.Pos 3.2 SKU:
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • Optical Scales: 5 μm resolution (0.000197") with outside cover from aluminum for protection against oil, coolant and chips

Basic Functions

  • Resolution of 0.000197"
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function
Toolbox with operating tools
Toolbox with operating tools SKU:
Coolant system
Coolant system SKU:
Steady and follow rests
Steady and follow rests SKU:
  • Steady rest - max. workpiece diameter: Ø200 mm
  • Follow rest - max. wokkpiece diameter: Ø130 mm
LED Work light
LED Work light SKU:
Rapid feed on Z and X axes
Rapid feed on Z and X axes SKU:

3-axis position indicator X.Pos 3.2

  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • Optical Scales: 5 μm resolution (0.000197") with outside cover from aluminum for protection against oil, coolant and chips

Basic Functions

  • Resolution of 0.000197"
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Resources & Downloads

Similar Products

consultation

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Sinus 400/2000 D - Classic design with extensive standard equipment, including 3 axis read out
Sinus 400/2000 D
SKU : 490010
*
*
*
*
*
*

*
*
*

*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

*
*
*
*
*

*
*
*

*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.