Need help finding a machine?
We will gladly assist you in making the right decision to achieve your business goals
Product Details
- Completely enclosed design, prevents contamination from dirt and chips
- Setup table rotates on a large, ring-shaped, oil-bath lubricated, guide way
- The very effective clamp pulls the setup table down straight, without any change of position or radial pressure and presses it against the guide way
- For quick manual turning, the worm can be disengaged from the worm gear by pushing down the hand-lever
- Setup table with 360° scale
- The zero-backlash of worm and worm gear is adjustable
- The high precision worm gear is almost as large as the rotary table
- Hardened, ground and oil-bath lubricated worm
- Worm gear ratio 90:1, swivel plane 60:1
- Hand wheel scale gradation 10''
- Hand wheel can be replaced with indexing plate
Accuracy:
- Surface concentricity of work table setup surface = 0.0008"
- Concentricity of setup = 0.0008"
- Parallelism of setup to base surface = 0.0008"
- Concentricity of setup table taper bore = 0.0004"
- Parallelism of table setup to transverse slot = 0.0008"
- Division accuracy 45'"
Technical Specs
Weight
172 lbs
Diameter
10 in
Required space, including safety zone
1:90
Height (horizontal)
8.07 in
Center height (vertical)
5.51 in
Clamping surface width
9.92 in
Clamping surface depth
12.2 in
Clamping surface slot width
0.55 in
Turntable slot width
0.47 in
Morse taper
3 MT
Swivelable Rotary Table RTS 250
SKU : 125810A swiveling rotary table is a universal device for positioning a workpiece at a precise angle, so that it can be machined on its face or side surface. The workpiece here is fastened on a slot table, or workpiece gripping devices can be used to hold it. This allows bolt hole circles to be drilled or curves to be milled. The additional swivel option allows angled boreholes. These models can be equipped with indexers for indirect separation.
- Compact designs
- Can be equipped for indirect separation
- Multi-side processing in one clamped position
Product Details
- Completely enclosed design, prevents contamination from dirt and chips
- Setup table rotates on a large, ring-shaped, oil-bath lubricated, guide way
- The very effective clamp pulls the setup table down straight, without any change of position or radial pressure and presses it against the guide way
- For quick manual turning, the worm can be disengaged from the worm gear by pushing down the hand-lever
- Setup table with 360° scale
- The zero-backlash of worm and worm gear is adjustable
- The high precision worm gear is almost as large as the rotary table
- Hardened, ground and oil-bath lubricated worm
- Worm gear ratio 90:1, swivel plane 60:1
- Hand wheel scale gradation 10''
- Hand wheel can be replaced with indexing plate
Accuracy:
- Surface concentricity of work table setup surface = 0.0008"
- Concentricity of setup = 0.0008"
- Parallelism of setup to base surface = 0.0008"
- Concentricity of setup table taper bore = 0.0004"
- Parallelism of table setup to transverse slot = 0.0008"
- Division accuracy 45'"
Technical Specs
Weight
172 lbs
Diameter
10 in
Required space, including safety zone
1:90
Height (horizontal)
8.07 in
Center height (vertical)
5.51 in
Clamping surface width
9.92 in
Clamping surface depth
12.2 in
Clamping surface slot width
0.55 in
Turntable slot width
0.47 in
Morse taper
3 MT
