Turnado 280/1500 PRO - Top model of the Turnado series with infinitely variable spindle speed and constant cutting speed, as well as rapid traverse and modern ergonomic design
Support moves in linear and cross direction via motorized rapid feed for reduced down-time

Support moves in linear and cross direction via motorized rapid feed for reduced down-time

Turnado 280/1500 PRO - Top model of the Turnado series with infinitely variable spindle speed and constant cutting speed, as well as rapid traverse and modern ergonomic design
Support moves in linear and cross direction via motorized rapid feed for reduced down-time

Turnado 280/1500 PRO

SKU : 320564

The machines of the Turnado PRO series are the modern version of the classic lathe. The PRO models are the latest generation of our universal lathes, which have been tried and tested for 20 years. With constant cutting speed, rapid traverses and an extended speed range that can be controlled by an inverter, these models are characterized by high-performance machining, excellent surface quality and time efficiency. They are easy to recognize by the new ergonomic cladding design, which integrates all functions into an overall concept.

  • Infinitely variable speed range
  • Support with rapid feed motor
  • Extensive standard equipment
  • Constant cutting speed
Working Area
Center width 59.06 in
Center height 11 in
Turning-Ø over bed 22 in
Turning diameter over gap bridge 31 in
Turning-Ø over support 14 in
Gap bridge length 7 in
Bed width 14 in
Travels
Travel X-axis 12.4 in
Travel Z1-axis 5 in
Swing range of top slide ± 52°
Headstock
Speed range, low 25 rpm - 200 rpm
Speed range, high 200 rpm - 1600 rpm
Spindle bore 3.1 in
Spindle mount Camlock D1-8
Spindle taper 7 MT
Feed
Feed X-axis 0.00079 in/R - 0.02256 in/R
Feed Z-axis 0.00232 in/R - 0.0648 in/R
Threading
Threading, metric 0.2 mm - 14 mm
Threading, diametric (50) 4-112 DP
Threading, module 0.1 mm - 7 mm
Threading, whitworth (60) 2-112 TPI
Tailstock
Tailstock quill diameter 3 in
Tailstock taper MT 5
Tailstock quill stroke 7 in
Tailstock traverse adjustment ± 0.47 in
Drive Capacity
Motor rating main drive 10.1 Hp
Measures and Weights
Overall dimensions (length x width x height) 112 in x 46 in x 58 in
Weight 5214 lbs

  • With a new support, rapid feed and a modern ergonomic machine frame, the Turnado Lathe PRO series continues its success story
  • A heavily ribbed machine bed, rigid headstock and a massive one-piece cast-iron stand form a solid machine base
  • Removable bridge allows machining of short workpieces with large diameters
  • Back-gearing and an advanced electronic control technology of the powerful main spindle drive ensure high torque and a wide range of speeds
  • High-precision pre-loaded spindle bearings ensure superior concentricity and load capacity
  • All guides are adjustable
  • Gears, transmission shafts, and guideways are hardened and ground to guarantee quiet operation and long tool life
  • The apron runs in an oil bath for low maintenance and high reliability
  • A central lubrication system inside the support supplies all guideways with lubrication and simplifies maintenance
  • Micrometer bed stop ensures high repeatability on the Z-axis
  • The tailstock can be adjusted sideways for taper turning
  • The extensive features of the X.Pos Position Indicator are complemented here with a digital speed indicator and an easy to program auxiliary function
  • Constant cutting speed: during face turning, the spindle speed automatically adapts to the changing workpiece diameter – the constant cutting speed at the cutting edge of the turning tool ensures superior turning results with quality comparable to CNC lathes

3-axis position indicator, X.pos 3.2 VC SKU:
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • Optical Scales: 5 μm resolution (0.000197") with outside cover from aluminum for protection against oil, coolant and chips

Basic Functions

  • Resolution of 0.000197"
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Constant cutting speed

  • Allows you to have constant cutting speed during - the spindle speed automatically adjusts based on the turning diameter
3-axis position indicator, X.pos 3.2 VC
3-axis position indicator, X.pos 3.2 VC SKU:
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • Optical Scales: 5 μm resolution (0.000197") with outside cover from aluminum for protection against oil, coolant and chips

Basic Functions

  • Resolution of 0.000197"
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Constant cutting speed

  • Allows you to have constant cutting speed during - the spindle speed automatically adjusts based on the turning diameter
3-jaw chuck Ø 12 inch
3-jaw chuck Ø 12 inch SKU:
  • self-centering 3 jaw chuck
  • size of Ø 12 in
  • made of cast iron
  • delivered with one set of hard jaws
4-jaw face chuck Ø 14 inch
4-jaw face chuck Ø 14 inch SKU:
  • independent4 jaw chuck 
  • size of Ø 13.7 in
  • made of cast iron
  • delivered with one set of hard jaws
Face plate Ø 17.7 inch
Face plate Ø 17.7 inch SKU:

Face plate diam. Ø17.7 in

Quick tool changer head WC
Quick tool changer head WC SKU:

High quality German type quick change tool holder to easily switch the tools with a repeat accuracy of 0.0004 in.

Quick change tool holder WCD 32150
Quick change tool holder WCD 32150 SKU:
  • Tool holder WCD 32150
  • Side 1.3 x 6 in
Coolant system
Coolant system SKU:
Follow and steady rests
Follow and steady rests SKU:
Rapid feed
Rapid feed SKU:
Fixed splash guard (wall)
Fixed splash guard (wall) SKU:
Chuck guard
Chuck guard SKU:
Foot brake pedal
Foot brake pedal SKU:
Work light
Work light SKU:
Reducing sleeve
Reducing sleeve SKU:
Dead center
Dead center SKU:
Toolbox with operating tools
Toolbox with operating tools SKU:
Operator instructions
Operator instructions SKU:
Micrometer longitudinal stop
Micrometer longitudinal stop SKU:
Thread gauge
Thread gauge SKU:
Traveling cover for the toolpost
Traveling cover for the toolpost SKU:

3-axis position indicator, X.pos 3.2 VC

  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • Integrating multiple functions, this new generation of 3 axis digital readouts significantly offer a much better control over the machining processes, greatly decreasing down-times and error rates
  • It features a totally sealed enclosure made of high quality polyester film which protects it against hazardous enviroments in shop floors, such as dust or fumes and offers excellent chemical resistance to most commonly used industry solvents
  • Optical Scales: 5 μm resolution (0.000197") with outside cover from aluminum for protection against oil, coolant and chips

Basic Functions

  • Resolution of 0.000197"
  • Spindle control ON/OFF
  • Unit measurement conversion Inch / Metric
  • Setting / Reseting current position
  • Coordinate display switching ABS / INC
  • Radius / Diameter display
  • Z1/Z2 Axes summing
  • Pocket calculator functions

Extended Functions

  • Axis position is maintained when display is turned off
  • Hole circle pattern calculation
  • Radius / diameter toggle
  • Reference function for tool gauging
  • Taper turning function

Constant cutting speed

  • Allows you to have constant cutting speed during - the spindle speed automatically adjusts based on the turning diameter

Resources & Downloads

Optional Accessories

Explore the range of compatible accessories in stock

Chucks and Accessories 4-Jaw Lathe Chuck Steel 12 inch
SKU : 146483
Lathes accessories Quick-Set Spindle Bore Stop Size 9 3.1-3.6 inch
SKU : 103025
Installation, Assembly Pivoted Mounts LK 6
SKU : 103332
Lathes accessories Quick-Set Spindle Bore Stop Size 7 2.2-2.6 in
SKU : 103022
Oil, Coolants and Lubricants Coolant Concentrate 5 Ltr.
SKU : 103184
Lathe Tool Post Tool Holder WCD 32x150
SKU : 103301
Lathe Tool Post Tool Holder WCD 32x170
SKU : 103302
Lathe Tool Post Tool Holder WCD 40x150
SKU : 103303
Lathe Tool Post Tool Holder WCD 40x170
SKU : 103304
Lathe Tool Post Tool Holder WCD 45x170
SKU : 103305
Lathe Tool Post Tool Holder WCH 50x160
SKU : 103307
Lathe Tools and Accessories Live Center MT 4
SKU : 106755
Milling & Drilling Adapters Reduction Sleeve MT 4/1
SKU : 103820
Milling & Drilling Adapters Reduction Sleeve MT 4/2
SKU : 103825
Milling & Drilling Adapters Reduction Sleeve MT 4/3
SKU : 103830
Chip Removal Power Worker Metal Cutter
SKU : 123040
Milling & Drilling Adapters Extension Sleeve MT 4/5
SKU : 104670
Drill Chucks Tool Holder Bit MT4 / B16
SKU : 104745
Drill Chucks Tool Holder Bit MT4 / B18
SKU : 104750
Drill Chucks Keyless Drill Chuck 0.12-0.63 in B 18
SKU : 104770
Drill Chucks Keyless Drill Chuck 0.04-0.5 in B 16
SKU : 104765
Lathes accessories Quick-Set Spindle Bore Stop Size 8 2.5-3.2 in
SKU : 103024
Lathe Tool Post Quick-Change Tool Holder Set WC
SKU : 103196
Lathe Tool Post Radius Cutting Head
SKU : 103350
Milling & Drilling Adapters Reduction Sleeve MT 5/4
SKU : 103845
Micrometers Measuring Tool Set M5
SKU : 108344
Micrometers Digital Micrometer Calipers 0 - 4 in
SKU : 108365
Lathe Tools and Accessories Knurl Set, angles
SKU : 108521
Lathe Tools and Accessories Indexable Insert Set 0.98 in, 30 pcs.
SKU : 108675
Lathe Tools and Accessories Turning Tool Set 8 pcs., 0.78 in
SKU : 108700
Dial Indicators Hydraulic measuring tripod
SKU : 108810
Chucks and Accessories Soft Jaw Pads for 3-jaw chuck 12.4"
SKU : 116553
Chucks and Accessories Soft Jaw Pads for 4-jaw chuck 12.4"
SKU : 116653
Chucks and Accessories 4-Jaw Face Plate Chuck 12 in D1-6
SKU : 116673
Chucks and Accessories Soft Jaw Pads 12 in
SKU : 116692
Dial Indicators Dial digital 0- 0.5 in
SKU : 127011
Dial Indicators Dial Holder
SKU : 127422
Inspection Gauges Dial Caliper 12 in
SKU : 129131
Lathe Tool Post Tool Holder WCJ 50x160
SKU : 103309
Lathe Tool Post Tool Holder WCJ 40x160
SKU : 103308
Lathe Tool Post Cut-off insert holder WCA-A3a
SKU : 103310
Lathe Tool Post Quick-Change Tool Holder Heads WC
SKU : 103192

Similar Products

Turnado 230/1000 PRO - Top model of the Turnado series with infinitely variable spindle speed and constant cutting speed, as well as rapid traverse and modern ergonomic design

Turnado 230/1000 PRO

Center width: 39,37 in
Turning-Ø over bed: 18 in
Turnado 230/1500 PRO - Top model of the Turnado series with infinitely variable spindle speed and constant cutting speed, as well as rapid traverse and modern ergonomic design

Turnado 230/1500 PRO

Center width: 59,06 in
Turning-Ø over bed: 18 in
Turnado 230/1000 PRO - Top model of the Turnado series with infinitely variable spindle speed and constant cutting speed, as well as rapid traverse and modern ergonomic design

Turnado 230/1000 PRO

Center width: 39,37 in
Turning-Ø over bed: 18 in
Turnado 230/1500 PRO - Top model of the Turnado series with infinitely variable spindle speed and constant cutting speed, as well as rapid traverse and modern ergonomic design

Turnado 230/1500 PRO

Center width: 59,06 in
Turning-Ø over bed: 18 in
consultation

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

Turnado 280/1500 PRO - Top model of the Turnado series with infinitely variable spindle speed and constant cutting speed, as well as rapid traverse and modern ergonomic design
Turnado 280/1500 PRO
SKU : 320564
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a service

*
*
*
*
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our service representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.