Plasma-Jet Compact H 1530

Maximum productivity

• Considerably faster progress with 5x higher cutting speeds compared to oxy-fuel cutting in 12 mm structural steel
• Grinding and edge preparation take considerably less time due to the excellent cutting and gouging quality
• Maximize your cutting time with 100% uptime

Low operating cost

• Lower your cost due to 4x longer consumable life compared to other systems in this class
• End of electrode life is automatically detected and power is cut off upon electrode overload to protect torch and workpiece from damages

Easy to use for cutting and gouging

• No need to adjust the air pressure. Smart Sense™ technology ensures that the air pressure is always set correctly
• Various easy-to-use torch types for different tasks are available

Developed and tested for use in harsh environments

• Duramax® Hyamp™ torches are designed with high impact strength and high temperature resistance
• SpringStart™ technology ensures consistent starting and a more reliable torch
• Minimal maintenance requirement ensures maximum uptime

Cutting capacity

• Recommended thickness 38 mm Cutting speed 457 mm/min
• Severing cut thickness 44 mm Cutting speed 250 mm/min
• Severing cut (in manual operation) thickness 57 mm Cutting speed 125 mm/min
• Plunge-cut thickness 25 mm

• The MAXPRO200® LongLife® Plasma Cutting System was developed for high-capacity, high-load cutting and gouging applications. This user-friendly system can be operated with air, oxygen or nitrogen plasma. It features high cutting speeds and quick process change-overs for maximum productivity The latest Hypertherm consumable design, like LongLife® technology, increase wear resistance and consumable life resulting in lower per-part cost.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

• The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
• It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.

• Maximum output: 170 A
• Thicknesses for optimal cutting quality: 3–35 mm
• Cutting speed for 20 mm at 170 A: 1575 mm/min
• Hole cutting capacity: 40 mm
• Separating cut capacity: 60 mm

The Core console is designed for customers who mainly cut unalloyed steel. The Core console, using nitrogen as the plasma gas, offers full X-definition performance for unalloyed steel and entry-level performance for alloyed steel and aluminum. Core allows marking with nitrogen plasma gas on all materials

• The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
• It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.

• Maximum output: 170 A
• Thicknesses for optimal cutting quality: 3–35 mm
• Cutting speed for 20 mm at 170 A: 1575 mm/min
• Hole cutting capacity: 40 mm
• Separating cut capacity: 60 mm

The VWI (Vented Water Injection™) console was developed for customers whose volumes consist primarily of unalloyed steel, but who need better performance when cutting alloyed steel and aluminum, the ability to plunge-cut thicker materials, or high-quality marking. The VWI console offers all the advantages of the Core console, as well as:

• Patent-pending VWI processes, using a protective shield for water spraying and delivering superior cutting results with alloyed steel and aluminum
• The F5 fuel gas function delivers better results than cutting with nitrogen for thinner alloys
• The argon gas function provides extremely good marking results and a higher plunge-cutting capacity with argon-supported cutting processes

• The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
• It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.

• Maximum output: 170 A
• Thicknesses for optimal cutting quality: 3–35 mm
• Cutting speed for 20 mm at 170 A: 1575 mm/min
• Hole cutting capacity: 40 mm
• Separating cut capacity: 60 mm

The OptiMix console was developed for customers who cut large quantities of alloyed steel and aluminum and need top-quality cutting results for these applications. The OptiMix console offers all the features of the VWI console plus the ability to mix up to three different gases:

• Reduces the costs of buying premixed fuel gases like H35
• Offers the flexibility of adjusting gas mixes to optimize cutting results for alloyed steel and aluminum

Additional tube support - must indicate, if round or square tubes