Plasma-Jet TrueCut 1530 H

• The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
• It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.

• Maximum output: 170 A
• Thicknesses for optimal cutting quality: 3–35 mm
• Cutting speed for 20 mm at 170 A: 1575 mm/min
• Hole cutting capacity: 40 mm
• Separating cut capacity: 60 mm

The Core console is designed for customers who mainly cut unalloyed steel. The Core console, using nitrogen as the plasma gas, offers full X-definition performance for unalloyed steel and entry-level performance for alloyed steel and aluminum. Core allows marking with nitrogen plasma gas on all materials

• The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
• It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.

• Maximum output: 170 A
• Thicknesses for optimal cutting quality: 3–35 mm
• Cutting speed for 20 mm at 170 A: 1575 mm/min
• Hole cutting capacity: 40 mm
• Separating cut capacity: 60 mm

The VWI (Vented Water Injection™) console was developed for customers whose volumes consist primarily of unalloyed steel, but who need better performance when cutting alloyed steel and aluminum, the ability to plunge-cut thicker materials, or high-quality marking. The VWI console offers all the advantages of the Core console, as well as:

• Patent-pending VWI processes, using a protective shield for water spraying and delivering superior cutting results with alloyed steel and aluminum
• The F5 fuel gas function delivers better results than cutting with nitrogen for thinner alloys
• The argon gas function provides extremely good marking results and a higher plunge-cutting capacity with argon-supported cutting processes

• The XPR170™ is the newest system in the XPR™ Plasma product line. The XPR170™ provides next-generation X-Definition™ processes for very thin to medium thick materials, expanding the spectrum of plasma applications with unprecedented new possibilities.
• It is known for its superior X-Definition™ cutting quality in plain carbon steel, steel alloys, and aluminum. The XPR170™ also provides higher cutting speeds, resulting in drastically increased productivity and reduced operating cost. New user-friendly features and system optimizations simplify the XPR’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.

• Maximum output: 170 A
• Thicknesses for optimal cutting quality: 3–35 mm
• Cutting speed for 20 mm at 170 A: 1575 mm/min
• Hole cutting capacity: 40 mm
• Separating cut capacity: 60 mm

The OptiMix console was developed for customers who cut large quantities of alloyed steel and aluminum and need top-quality cutting results for these applications. The OptiMix console offers all the features of the VWI console plus the ability to mix up to three different gases:

• Reduces the costs of buying premixed fuel gases like H35
• Offers the flexibility of adjusting gas mixes to optimize cutting results for alloyed steel and aluminum

• The XPR300™ represents the latest advances in mechanized plasma cutting technology on the market. These units redefine the next generation of plasma cutting performance. They expand the application spectrum and possibilities in ways never conceived before.
• The XPR300 is known for its superior X-Definition® cutting quality in plain carbon steel, steel alloys, and aluminum. Its much higher cutting speed generates greatly increased productivity, with the resulting lower operating costs.
• Its new user-friendly features and system optimizations simplify the XPR300’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.

• Maximum output: 300 A
• Thicknesses for optimal cutting quality: 3–45 mm
• Cutting speed for 20 mm at 300 A: 2550 mm/min
• Hole cutting capacity: 50 mm
• Separating cut capacity: 80 mm

The Core console is designed for customers who mainly cut unalloyed steel. The Core console, using nitrogen as the plasma gas, offers full X-definition performance for unalloyed steel and entry-level performance for alloyed steel and aluminum. Core allows marking with nitrogen plasma gas on all materials

• The XPR300™ represents the latest advances in mechanized plasma cutting technology on the market. These units redefine the next generation of plasma cutting performance. They expand the application spectrum and possibilities in ways never conceived before.
• The XPR300 is known for its superior X-Definition® cutting quality in plain carbon steel, steel alloys, and aluminum. Its much higher cutting speed generates greatly increased productivity, with the resulting lower operating costs.
• Its new user-friendly features and system optimizations simplify the XPR300’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.

• Maximum output: 300 A
• Thicknesses for optimal cutting quality: 3–45 mm
• Cutting speed for 20 mm at 300 A: 2550 mm/min
• Hole cutting capacity: 50 mm
• Separating cut capacity: 80 mm

The VWI (Vented Water Injection™) console was developed for customers whose volumes consist primarily of unalloyed steel, but who need better performance when cutting alloyed steel and aluminum, the ability to plunge-cut thicker materials, or high-quality marking. The VWI console offers all the advantages of the Core console, as well as:

• Patent-pending VWI processes, using a protective shield for water spraying and delivering superior cutting results with alloyed steel and aluminum
• The F5 fuel gas function delivers better results than cutting with nitrogen for thinner alloys
• The argon gas function provides extremely good marking results and a higher plunge-cutting capacity with argon-supported cutting processes

• The XPR300™ represents the latest advances in mechanized plasma cutting technology on the market. These units redefine the next generation of plasma cutting performance. They expand the application spectrum and possibilities in ways never conceived before.
• The XPR300 is known for its superior X-Definition® cutting quality in plain carbon steel, steel alloys, and aluminum. Its much higher cutting speed generates greatly increased productivity, with the resulting lower operating costs.
• Its new user-friendly features and system optimizations simplify the XPR300’s operation, minimize operator intervention and ensure maximum capacity with unsurpassed reliability.

• Maximum output: 300 A
• Thicknesses for optimal cutting quality: 3–45 mm
• Cutting speed for 20 mm at 300 A: 2550 mm/min
• Hole cutting capacity: 50 mm
• Separating cut capacity: 80 mm

The OptiMix console was developed for customers who cut large quantities of alloyed steel and aluminum and need top-quality cutting results for these applications. The OptiMix console offers all the features of the VWI console plus the ability to mix up to three different gases:

• Reduces the costs of buying premixed fuel gases like H35
• Offers the flexibility of adjusting gas mixes to optimize cutting results for alloyed steel and aluminum

Additional tube support - must indicate, if round or square tubes

• The MAXPRO200® LongLife® Plasma Cutting System was developed for high-capacity, high-load cutting and gouging applications. This user-friendly system can be operated with air, oxygen or nitrogen plasma. It features high cutting speeds and quick process change-overs for maximum productivity The latest Hypertherm consumable design, like LongLife® technology, increase wear resistance and consumable life resulting in lower per-part cost.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

• The Hypertherm XPR460® is one of the world’s most powerful and versatile series of mechanized plasma cutting systems for cutting unalloyed steel, alloyed steel and aluminum in various thicknesses – even on uneven surfaces
• The XPR460 excels with maximum versatility, productivity and accuracy
• All consumables are of consistent high quality that will last across their lifetime – from the first to the last cut
• Precision cutting with the XPR460 will result in less dross buildup and thereby reduces the amount of reworking

Increased versatility expands the range of applications

• Offers maximum versatility when cutting unalloyed steel, alloyed steel, and aluminum
• Allows cutting the widest spectrum of different metals and thicknesses
• Ensures high quality and consistent cuts on uneven metal surfaces, even on lacquer and rust

Maximized productivity leads to lower operating cost

• Maximum performance optimizes productivity due to high quality cuts, higher cutting speeds and the ability to cut thicker materials
• Argon-based technology allows hole punching and starting at the edge, even on very thick unalloyed and alloyed steel
• Cuts with oxygen up to 460 Amp and delivers the best cutting results on unalloyed steel
• Exclusive Arc Response Technology™ kicks in when problems arise to protect consumable life and prevent damages to the torch

Precision cuts lead to reduced reworking

• All parts are of consistent high quality that will last across their lifetime from the first to the last cut
• Ensures a smooth surface, minimal angularity, and minimal or no dross buildup, so only clean cut parts leave the cutting table
• Integrated XPR® technology improves the quality of 45° bevel cuts on thicker materials for efficient welding
• The exclusive SureCut™ technology provides extended cutting functions via automatic integration in our plasma cutting process for even better results

• The Core console is designed for customers who mainly cut unalloyed steel
• The Core console, using nitrogen as the plasma gas, offers full X-definition performance for unalloyed steel and entry-level performance for alloyed steel and aluminum
• Core allows marking with nitrogen plasma gas on all materials

• The Hypertherm XPR460® is one of the world’s most powerful and versatile series of mechanized plasma cutting systems for cutting unalloyed steel, alloyed steel and aluminum in various thicknesses – even on uneven surfaces
• The XPR460 excels with maximum versatility, productivity and accuracy
• All consumables are of consistent high quality that will last across their lifetime – from the first to the last cut
• Precision cutting with the XPR460 will result in less dross buildup and thereby reduces the amount of reworking

Increased versatility expands the range of applications

• Offers maximum versatility when cutting unalloyed steel, alloyed steel, and aluminum
• Allows cutting the widest spectrum of different metals and thicknesses
• Ensures high quality and consistent cuts on uneven metal surfaces, even on lacquer and rust

Maximized productivity leads to lower operating cost

• Maximum performance optimizes productivity due to high quality cuts, higher cutting speeds and the ability to cut thicker materials
• Argon-based technology allows hole punching and starting at the edge, even on very thick unalloyed and alloyed steel
• Cuts with oxygen up to 460 Amp and delivers the best cutting results on unalloyed steel
• Exclusive Arc Response Technology™ kicks in when problems arise to protect consumable life and prevent damages to the torch

Precision cuts lead to reduced reworking

• All parts are of consistent high quality that will last across their lifetime from the first to the last cut
• Ensures a smooth surface, minimal angularity, and minimal or no dross buildup, so only clean cut parts leave the cutting table
• Integrated XPR® technology improves the quality of 45° bevel cuts on thicker materials for efficient welding
• The exclusive SureCut™ technology provides extended cutting functions via automatic integration in our plasma cutting process for even better results

All Core console functions plus argon tagging, and over 10% more piercing depth with argon support lead to an optimized hole punching capacity

• The Hypertherm XPR460® is one of the world’s most powerful and versatile series of mechanized plasma cutting systems for cutting unalloyed steel, alloyed steel and aluminum in various thicknesses – even on uneven surfaces
• The XPR460 excels with maximum versatility, productivity and accuracy
• All consumables are of consistent high quality that will last across their lifetime – from the first to the last cut
• Precision cutting with the XPR460 will result in less dross buildup and thereby reduces the amount of reworking

Increased versatility expands the range of applications

• Offers maximum versatility when cutting unalloyed steel, alloyed steel, and aluminum
• Allows cutting the widest spectrum of different metals and thicknesses
• Ensures high quality and consistent cuts on uneven metal surfaces, even on lacquer and rust

Maximized productivity leads to lower operating cost

• Maximum performance optimizes productivity due to high quality cuts, higher cutting speeds and the ability to cut thicker materials
• Argon-based technology allows hole punching and starting at the edge, even on very thick unalloyed and alloyed steel
• Cuts with oxygen up to 460 Amp and delivers the best cutting results on unalloyed steel
• Exclusive Arc Response Technology™ kicks in when problems arise to protect consumable life and prevent damages to the torch

Precision cuts lead to reduced reworking

• All parts are of consistent high quality that will last across their lifetime from the first to the last cut
• Ensures a smooth surface, minimal angularity, and minimal or no dross buildup, so only clean cut parts leave the cutting table
• Integrated XPR® technology improves the quality of 45° bevel cuts on thicker materials for efficient welding
• The exclusive SureCut™ technology provides extended cutting functions via automatic integration in our plasma cutting process for even better results

The VWI (Vented Water Injection™) console was developed for customers whose volumes consist primarily of unalloyed steel, but who need better performance when cutting alloyed steel and aluminum, the ability to plunge-cut thicker materials, or high-quality marking. The VWI console offers all the advantages of the Core console, as well as:

• Patent-pending VWI processes, using a protective shield for water spraying and delivering superior cutting results with alloyed steel and aluminum
• The F5 fuel gas function delivers better results than cutting with nitrogen for thinner alloys
• The argon gas function provides extremely good marking results and a higher plunge-cutting capacity with argon-supported cutting processes

• The Hypertherm XPR460® is one of the world’s most powerful and versatile series of mechanized plasma cutting systems for cutting unalloyed steel, alloyed steel and aluminum in various thicknesses – even on uneven surfaces
• The XPR460 excels with maximum versatility, productivity and accuracy
• All consumables are of consistent high quality that will last across their lifetime – from the first to the last cut
• Precision cutting with the XPR460 will result in less dross buildup and thereby reduces the amount of reworking

Increased versatility expands the range of applications

• Offers maximum versatility when cutting unalloyed steel, alloyed steel, and aluminum
• Allows cutting the widest spectrum of different metals and thicknesses
• Ensures high quality and consistent cuts on uneven metal surfaces, even on lacquer and rust

Maximized productivity leads to lower operating cost

• Maximum performance optimizes productivity due to high quality cuts, higher cutting speeds and the ability to cut thicker materials
• Argon-based technology allows hole punching and starting at the edge, even on very thick unalloyed and alloyed steel
• Cuts with oxygen up to 460 Amp and delivers the best cutting results on unalloyed steel
• Exclusive Arc Response Technology™ kicks in when problems arise to protect consumable life and prevent damages to the torch

Precision cuts lead to reduced reworking

• All parts are of consistent high quality that will last across their lifetime from the first to the last cut
• Ensures a smooth surface, minimal angularity, and minimal or no dross buildup, so only clean cut parts leave the cutting table
• Integrated XPR® technology improves the quality of 45° bevel cuts on thicker materials for efficient welding
• The exclusive SureCut™ technology provides extended cutting functions via automatic integration in our plasma cutting process for even better results

The OptiMix console was developed for customers who cut large quantities of alloyed steel and aluminum and need top-quality cutting results for these applications. The OptiMix console offers all the features of the VWI console plus the ability to mix up to three different gases:

• Reduces the costs of buying premixed fuel gases like H35
• Offers the flexibility of adjusting gas mixes to optimize cutting results for alloyed steel and aluminum