Plasma-Jet TrueCut K 2040

Additional tube support - must indicate, if round or square tubes

Plasma Cutting 4.0

The new future-oriented Q Series by Kjellberg brings precision plasma cutting to a new level while meeting the complex requirements of a digitalized production

• Complete new development with more than 60 years of Kjellberg know-how
• Inverter power source – digitally controlled, fully electronic process flow
• Modular design – subsequent upgrading of system performance possible
• Best cutting and marking quality – new Q-Mark and Q-Hole technologies
• Optimized processes – proven Contour Cut, Contour Cut Speed and Silent Cut cutting technologies
• Low cost per meter cut – improved cutting speed, longer lifetime of consumables
• Visualisation of machine, process and consumption information
• Preventive inspection and maintenance analysis
• Interactive database, training and service updates

Q-Desk, the browser-based user interface developed by Kjellberg, provides real-time process data and information about all system components on common terminals regardless of location.

Plasma Cutting 4.0

The new future-oriented Q Series by Kjellberg brings precision plasma cutting to a new level while meeting the complex requirements of a digitalized production

• Complete new development with more than 60 years of Kjellberg know-how
• Inverter power source – digitally controlled, fully electronic process flow
• Modular design – subsequent upgrading of system performance possible
• Best cutting and marking quality – new Q-Mark and Q-Hole technologies
• Optimized processes – proven Contour Cut, Contour Cut Speed and Silent Cut cutting technologies
• Low cost per meter cut – improved cutting speed, longer lifetime of consumables
• Visualisation of machine, process and consumption information
• Preventive inspection and maintenance analysis
• Interactive database, training and service updates

Q-Desk, the browser-based user interface developed by Kjellberg, provides real-time process data and information about all system components on common terminals regardless of location.

Power supply

• Flexible CNC-controlled cutting of any electrically conducting materials with thicknesses up to 50 mm
• Recommended cutting range is from 1 to 35 mm material thickness
• Maximum piercing depth is 30 mm
• Suitable for use under the most demanding conditions
• Easy operation and maintenance
• Cutting, scribe marking, notching and punching without replacement of wear parts
• Uses the patented plasma cutting technologies Contour Cut and Contour Cut Speed
• Secondary gas ignition prolongs consumable life and swirl gas technology is used for hole piercing to preserve nozzles
• This plasma cutter is an ideal plasma cutting machine for metal construction and mechanical engineering, contract cutting operations, steel structures and construction, systems and container construction and much more.

Technologies

• Contour Cut: For precise cutting of small contours, narrow lands, small radii and other geometries
• Contour Cut Speed: Best cutting performance at highest cutting speeds, ideal for highes quality demands
• Silent Cut: For cutting structural steel with reduced noise level

Plasma torch

• PerCut 2000 machine torch with quick-changing head and interior contact for initial position sensor
• Significantly less gas consumption than competitor models due to an effective liquid cooling system that includes the nozzle tip
• The same consumables are used for cutting and scribe marking
• Automatic PGV-300 gas console for the automatic control of gases based on material grade and material thickness using integrated databases

Plasma Cutting

• The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
• Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

• Superior cut quality
• High cutting speed
• Tight perpendicularity tolerance
• User-friendly and low maintenance
• Less cost per cut

Contour Cut (CC) technology

• All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
• Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
• Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

• The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
• These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
• The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
• Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Plasma Cutting

• The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
• Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

• Superior cut quality
• High cutting speed
• Tight perpendicularity tolerance
• User-friendly and low maintenance
• Less cost per cut

Contour Cut (CC) technology

• All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
• Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
• Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

• The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
• These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
• The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
• Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Plasma Cutting

• The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
• Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

• Superior cut quality
• High cutting speed
• Tight perpendicularity tolerance
• User-friendly and low maintenance
• Less cost per cut

Contour Cut (CC) technology

• All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
• Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
• Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

• The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
• These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
• The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
• Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

Plasma Cutting

• The Smart Focus series features a compact design and requires only few settings to achieve excellent cutting results - even under the most demanding conditions
• Smart Focus systems also allow scribe marking, beveling and underwater plasma cutting – Made in Germany.

Advantages

• Superior cut quality
• High cutting speed
• Tight perpendicularity tolerance
• User-friendly and low maintenance
• Less cost per cut

Contour Cut (CC) technology

• All systems of the Smart Focus series feature the tried-and-tested Contour Cut technology for structural steel cutting.
• Small contours, narrow lands and holes with a diameter/material thickness ratio of 1:1 can be cut with superior quality
• Using Contour Cut Speed, contours can be cut up to 50% faster

Torch and gas control – smart redesign

• The Smart Focus series now features redesigned gas consoles, which are available optionally as manual or fully automated versions.
• These optimized gas controls ensure superior cutting results with maximum quality and repeatability.
• The new PerCut 2000 and PerCut 4000 torches feature improved design and functionality allowing precision cuts and maximum cutting speeds.
• Their unique coolant system ensures maximum life of Kjellberg consumables, reduced gas consumption, and less cost per cut.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

• Cutting power up to 450 A
• Plasma cutting up to 120 mm
• Piercing depth 50 mm; can be increased when using ProPierce
• High cutting speeds ensure increased efficiency and lower cost
• Inverter power source with digitally controlled, fully electronic process flow
• Kjellberg eService offers remote diagnostics, remote monitoring, remote updates
• Contributes to climate protection by significantly reducing the carbon footprint

For up to 6 m long machines

• To meet future demands, the Q 1500 Plus and Q 3000 Plus cutting capacity can be increased via Upgrade Kits
• Plug and Play inverter module can be added to increase the cutting power up to 450 A
• This configuration enables the user to make exact plasma cuts up to 120 mm