Product Details
Universal-4-jaw lathe chuck with centric clamping action
- With short taper mount for Camlock acc. to DIN 55029
- Can be mounted with using an intermediate flange
- Chuck body made of cast iron
- Hardened and ground scroll chuck
- Ground chuck jaws
- High clamping force
- High concentricity
Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts
Additional options available upon request
Technical Specs
Speed
700 1/min
Weight
150 kg
Diameter
500 mm
Mounts
Camlock D1-11
Chuck bore
190 mm
4-jaw lathe chuck 500mm D1 -11(cast-iron)
€6,672.40
excl. VAT
Lathe chucks are chucks for workpiece clamping fixtures on lathes and dividers. The machined steel body of the lathe chuck provides better high-speed performance. They are supplied either for direct mounting or must be attached to the machine or equipment using a flange. Four-jaw lathe chucks are ideal for round or regularly shaped 4-, 8-, and 12-sided workpieces. The workpiece is always held centered, because the jaws are operated by a scroll chuck. Basic lathe equipment includes hardened drill and lathe jaws.
- Universal-4-jaw lathe chuck with centric clamping action
- Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts
- High concentricity and clamping force
Product Details
Universal-4-jaw lathe chuck with centric clamping action
- With short taper mount for Camlock acc. to DIN 55029
- Can be mounted with using an intermediate flange
- Chuck body made of cast iron
- Hardened and ground scroll chuck
- Ground chuck jaws
- High clamping force
- High concentricity
Includes socket spanner, drill and lathe chuck jaws, Camlock-stud bolts
Additional options available upon request
Technical Specs
Speed
700 1/min
Weight
150 kg
Diameter
500 mm
Mounts
Camlock D1-11
Chuck bore
190 mm
