Product Details
- Gear ratio 1:90, disengages for direct division, manual 360° rotation of chuck
- Hand wheel with scale ring
- Nonius division 10''
- 6 masks for direct division of 2, 3, 4, 6, 8, 12, 24 parts
- Hardened and ground teeth with 3-jaw chuck, 160 or 200 mm
Technical Specs
Center height
155 mm
Lathe chuck Ø
200 mm
Divider ST 155
€1,700.00
excl. VAT
A divider is a universal device for gripping and positioning a workpiece at a precise angle, so that it can be machined on its face or side surface. Universal dividers can create direct and indirect separations. Direct separations are normally 2, 3, 4, 6, 12 and 24, and indirect separations are set with an optional indexing component. This divider can be clamped vertically and horizontally. A set of tailstocks and indexing disks is available as an optional accessory.
- Vertical and horizontal setup
- Centrally clamping 3-jaw chuck
- Can be expanded for indirect separation
Product Details
- Gear ratio 1:90, disengages for direct division, manual 360° rotation of chuck
- Hand wheel with scale ring
- Nonius division 10''
- 6 masks for direct division of 2, 3, 4, 6, 8, 12, 24 parts
- Hardened and ground teeth with 3-jaw chuck, 160 or 200 mm
Technical Specs
Center height
155 mm
Lathe chuck Ø
200 mm
