Plasma-Jet AirPro Compact 1530

Maximum productivity

• Considerably faster progress with 5x higher cutting speeds compared to oxy-fuel cutting in 12 mm structural steel
• Grinding and edge preparation take considerably less time due to the excellent cutting and gouging quality
• Maximize your cutting time with 100% uptime

Low operating cost

• Lower your cost due to 4x longer consumable life compared to other systems in this class
• End of electrode life is automatically detected and power is cut off upon electrode overload to protect torch and workpiece from damages

Easy to use for cutting and gouging

• No need to adjust the air pressure. Smart Sense™ technology ensures that the air pressure is always set correctly
• Various easy-to-use torch types for different tasks are available

Developed and tested for use in harsh environments

• Duramax® Hyamp™ torches are designed with high impact strength and high temperature resistance
• SpringStart™ technology ensures consistent starting and a more reliable torch
• Minimal maintenance requirement ensures maximum uptime

Cutting capacity

• Recommended thickness 38 mm Cutting speed 457 mm/min
• Severing cut thickness 44 mm Cutting speed 250 mm/min
• Severing cut (in manual operation) thickness 57 mm Cutting speed 125 mm/min
• Plunge-cut thickness 25 mm

• The Powermax105 SYNC® is a next-generation professional air plasma system that makes operating the system a breeze when cutting and gouging up to 32 mm.
• With automated process control using advanced RFID-compatible SmartSYNC® torch and revolutionary one-piece inserted wear part that provides trackable usage data.
• The Powermax105 SYNC maximizes productivity with lower downtimes, optimized cutting quality, and excellent wear part inventory management.

Cutting capacity

• Recommended thickness 32 mm Cutting speed 500 mm/min
• Severing cut thickness 38 mm Cutting speed 250 mm/min
• Severing cut (shearing in manual operation) thickness 50 mm Cutting speed 125 mm/min
• Plunge-cut thickness 22 mm

• As an option, the water table can be exchanged for a downdraft suction table. The choice must be indicated when ordering.

• The CutFire 100i is a powerful air/plasma system available at low cost, but suitable for wide variety of applications.
• It is equipped with the latest inverter technology and is one of the few air-cooled systems on the market that offers a duty cycle of 100%. 
• The cutting inverters CutFire 100i built in or after 2017 are equipped with the new Flash 101 machine torch. With its new consumables the torch uses air as swirl gas. The air rotating around the plasma arc stabilizes the arc to allow up to 20 mm deep piercing cuts.
• The cooling and protective effect of the swirl gas ensures higher cutting speeds and longer consumable life.
• The CutFire 100i is ideally suited for cutting thin sheets for ventilation systems and control cabinet construction, metal building applications, as well as many other craft, production and industrial operations.

CutFire 100i Advantages:

• Swirl gas technology
• Cutting up to 40 mm
• Piercing up to 20 mm
• Precision cutting up to 3 mm
• Higher piercing safety
• New consumables
• High cutting speeds
• Electrical contact for finding the initial position (Option)

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system

• The MAXPRO200® LongLife® Plasma Cutting System was developed for high-capacity, high-load cutting and gouging applications. This user-friendly system can be operated with air, oxygen or nitrogen plasma. It features high cutting speeds and quick process change-overs for maximum productivity The latest Hypertherm consumable design, like LongLife® technology, increase wear resistance and consumable life resulting in lower per-part cost.

Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system