Product Details
- Completely enclosed design, prevents contamination from dirt and chips
- With 3 radial setup T-slots
- Setup table rotates on a large ring-shaped box way
- The very effective clamp pulls the setup table down straight, without any change of position or radial pressure and presses it against the guideway
- Very low profile
- Guide slot in the vertical base plane
- For quick manual turning, the worm can be disengaged from the worm gear by pushing down the hand-lever
- Setup table with 360° scale
- Can be used vertically
- The zero-backlash of worm and worm gear is adjustable
- Hand wheel scale gradation 10''
- Hand wheel can be replaced with indexing plate
Accuracy (max. deviation):
- Sface concentricity of work table setup surface 300 : 0.015
- Concentricity of setup = 0.015
- Parallelism of setup to base surface 300 : 0.02
- Concentricity of setup table taper bore = 0.010
- Parallelism of bore axis to vertical setup surface 0.03
- Parallelism of bore axis to slot in the vertical setup surface 0.02
- Parallelism between vertical setup area and conus taper connection axis - tailstock center 0.02
- Parallelism between slot in the vertical setup surface and the connecting axis between centers 0.02
- Division accuracy 45"
Technical Specs
Weight
7,25 kg
Diameter
100 mm
Required space, including safety zone
1:90
Setup (clamping)
horizontal and vertical
Height
85 mm
Width
118 mm
Center height
90 mm
Clamping surface slot width
10 mm
Turntable slot width
10 mm
Depth
150 mm
Morse taper
2 MT
Rotary table RT 100
€280.00
excl. VAT
A rotary table is a universal device for positioning a workpiece at a precise angle, so that it can be machined on its face or side surface. The workpiece here is fastened on a slot table, or workpiece gripping devices can be used to hold it. This allows bolt hole circles to be drilled or curves to be milled. Many models can be equipped with indexing devices for indirect indexing.
- Compact designs
- Can be equipped for indirect indexing
Product Details
- Completely enclosed design, prevents contamination from dirt and chips
- With 3 radial setup T-slots
- Setup table rotates on a large ring-shaped box way
- The very effective clamp pulls the setup table down straight, without any change of position or radial pressure and presses it against the guideway
- Very low profile
- Guide slot in the vertical base plane
- For quick manual turning, the worm can be disengaged from the worm gear by pushing down the hand-lever
- Setup table with 360° scale
- Can be used vertically
- The zero-backlash of worm and worm gear is adjustable
- Hand wheel scale gradation 10''
- Hand wheel can be replaced with indexing plate
Accuracy (max. deviation):
- Sface concentricity of work table setup surface 300 : 0.015
- Concentricity of setup = 0.015
- Parallelism of setup to base surface 300 : 0.02
- Concentricity of setup table taper bore = 0.010
- Parallelism of bore axis to vertical setup surface 0.03
- Parallelism of bore axis to slot in the vertical setup surface 0.02
- Parallelism between vertical setup area and conus taper connection axis - tailstock center 0.02
- Parallelism between slot in the vertical setup surface and the connecting axis between centers 0.02
- Division accuracy 45"
Technical Specs
Weight
7,25 kg
Diameter
100 mm
Required space, including safety zone
1:90
Setup (clamping)
horizontal and vertical
Height
85 mm
Width
118 mm
Center height
90 mm
Clamping surface slot width
10 mm
Turntable slot width
10 mm
Depth
150 mm
Morse taper
2 MT
