Product Details
- Completely enclosed design, prevents contamination from dirt and chips
- Setup table rotates on a large, ring-shaped, oil-bath lubricated, guideway
- The very effective clamp pulls the setup table down straight, without any change of position or radial pressure and presses it against the guideway
- For quick manual turning, the worm can be disengaged from the worm gear by pushing down the hand-lever
- Setup table with 360° scale
- The zero-backlash of worm and worm gear is adjustable
- The high precision worm gear is almost as large as the rotary table
- Hardened, ground and oil-bath lubricated worm
- Worm gear ratio 90:1, swivel plane 60:1
- Hand wheel scale gradation 10''
- Hand wheel can be replaced with indexing plate
Accuracy:
- Face concentricity of work table setup surface = 0.020
- Concentricity of setup = 0.020
- Parallelism of setup to base surface = 0.020
- Concentricity of setup table taper bore = 0.010
- Parallelism of table setup to transverse slot = 0,020
- Division accuracy 45"
Technical Specs
Weight
133 kg
Diameter
320 mm
Required space, including safety zone
1:90
Height (horizontal)
255 mm
Center height (vertical)
175 mm
Clamping surface width
322 mm
Clamping surface depth
380 mm
Clamping surface slot width
18 mm
Turntable slot width
14 mm
Morse taper
4 MT
Swivelable Rotary Table RTS 320
€2,600.00
excl. VAT
A swiveling rotary table is a universal device for positioning a workpiece at a precise angle, so that it can be machined on its face or side surface. The workpiece here is fastened on a slot table, or workpiece gripping devices can be used to hold it. This allows bolt hole circles to be drilled or curves to be milled. The additional swivel option allows angled boreholes. These models can be equipped with indexers for indirect separation.
- Compact designs
- Can be equipped for indirect separation
- Multi-side processing in one clamped position
Product Details
- Completely enclosed design, prevents contamination from dirt and chips
- Setup table rotates on a large, ring-shaped, oil-bath lubricated, guideway
- The very effective clamp pulls the setup table down straight, without any change of position or radial pressure and presses it against the guideway
- For quick manual turning, the worm can be disengaged from the worm gear by pushing down the hand-lever
- Setup table with 360° scale
- The zero-backlash of worm and worm gear is adjustable
- The high precision worm gear is almost as large as the rotary table
- Hardened, ground and oil-bath lubricated worm
- Worm gear ratio 90:1, swivel plane 60:1
- Hand wheel scale gradation 10''
- Hand wheel can be replaced with indexing plate
Accuracy:
- Face concentricity of work table setup surface = 0.020
- Concentricity of setup = 0.020
- Parallelism of setup to base surface = 0.020
- Concentricity of setup table taper bore = 0.010
- Parallelism of table setup to transverse slot = 0,020
- Division accuracy 45"
Technical Specs
Weight
133 kg
Diameter
320 mm
Required space, including safety zone
1:90
Height (horizontal)
255 mm
Center height (vertical)
175 mm
Clamping surface width
322 mm
Clamping surface depth
380 mm
Clamping surface slot width
18 mm
Turntable slot width
14 mm
Morse taper
4 MT
