KMT RNC 2504 - Sliding block guided motorized plate shears with NC-controlled back gauge
KMT RNC 2504 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 2504

SKU : 133627

This model is part of the KMT RNC series and is an advanced, precision-machined plate shearing machine with premium components. It features a powerful drive for superior cutting performance. The rigid construction with sliding-block guided cutter bar and a straight cutting angle enables cuts with minimal torsion in the workpiece. The kerf can be adjusted manually, and back gauge positioning is NC-controlled. Handling plate sections is simplified enormously by the integrated Return-to-Sender function.

  • Solid steel weldment with sliding block guide
  • NC-controlled back gauge can be easily programmed
  • Automatic, semi-automatic, and manual modes
  • Cutter for stainless steel machining included
  • Reversible cutters with multiple cutting surfaces
  • Adjustable kerf
  • Return-to-Sender function
Working Area
Working length 101 in
Cutting angle 1.3 deg
Work table height 35 in
Work table depth 18 in
Number of support arms 2 positions
Support arms 39 in
Strokes per minute 31 H/min
Back Gauge
Rear stop 30 in
Cutting Capacities
Plate thickness (min.) - 450 N/mm² 0.008 in
Plate thickness (max.) - 450 N/mm² 0.157 in
Plate thickness(max.) - 700 N/mm² 0.079 in
Drive Capacity
Motor rating main drive 10.1 Hp
Measures and Weights
Overall dimensions (length x width x height) 126 in x 93 in x 56 in
Weight 7700 lbs

Machine Frame

  • The machine frame is made of a very rigid, solid steel weldment and the cutter bar is sliding-block guided
  • The high-precision guide ensures clean cuts and special cutters for machining stainless steel plates are included
  • The upper cutters are reversible for use of both sides, and the lower cutters feature 4 cutting edges
  • A rigid, continuous hold-down fixes the sheet metal plate right in front of the cut line
  • The optimum kerf for machining can be adjusted manually

Ergonomic Design

  • The “Return-to-Sender” function is an innovative plate shears feature that returns the cut off metal sheet automatically back to the operator position. This function provides increased process efficiency and operator safety
  • The rigid side angle stop simplifies precise alignment of the plate perpendicular to the cut line
  • Rugged support arms ensure a strong hold of large plates
  • Material support rollers are recessed in the table to simplify workpiece handling and avoid scratches on the workpiece
  • The mobile foot switch gives the operator added flexibility and both hands are free for handling the workpiece
  • The bright LED illumination of the cut line creates a clearly visible shadow on the marked line
  • Additionally, the smart machine enclosure design allows vertical view from the top for exact workpiece alignment
  • All lubrication points and adjustment screws are easily accessible to simplify regular maintenance

Rear stop:

  • The motorized back gauge ensures precise positioning in automatic, semi-automatic and manual mode
  • The NC-controlled back gauge can be easily and quickly programmed
  • The easy accessible work area at the back gauge is secured by light curtain

Equipment

  • High-quality electric components ensure reliable operation and maximum availability
  • The full machine enclosure provides maximum safety, features a practical design and is precision machined

BRL NC controller SKU:
BRL NC controller
BRL NC controller SKU:
cut counter
cut counter SKU:
cut-line lighting
cut-line lighting SKU:
finger guard
finger guard SKU:
light curtain
light curtain SKU:
upper cutter with 2 cutting edges / Lower cutter with 4 cutting edges
upper cutter with 2 cutting edges / Lower cutter with 4 cutting edges SKU:
foot switch with emergency stop switch
foot switch with emergency stop switch SKU:
lateral stop with scale and T-slots
lateral stop with scale and T-slots SKU:
support arms
support arms SKU:
Motorized rear stop (29 inch)
Motorized rear stop (29 inch) SKU:
manual kerf adjustment
manual kerf adjustment SKU:
manual Return-to-Sender function
manual Return-to-Sender function SKU:
table with material support rollers
table with material support rollers SKU:
Operator instructions
Operator instructions SKU:
Angular stop adjusts from 0 to 180°
Angular stop adjusts from 0 to 180° SKU: 254196
Angular stop adjusts from 0 to 180°
Back gauge travel increased to 39.4" SKU: 254197
Back gauge travel increased to 39.4"
Side stop L = 78.7" SKU: 254198
Side stop L = 78.7"
SKU: 254201
Pneumatic sheet hold-up device with reset function SKU: 254203
Pneumatic sheet hold-up device with reset function
Fuji control SKU: 254204
Fuji control

Resources & Downloads

Similar Products

KMT RNC 1505 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 1505

Working length: 61 in
Plate thickness (max.) - 450 N/mm²: 0,197 in
KMT RNC 2004 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 2004

Working length: 81 in
Plate thickness (max.) - 450 N/mm²: 0,157 in
KMT RNC 3004 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 3004

Working length: 120 in
Plate thickness (max.) - 450 N/mm²: 0,157 in
KMT RNC 1505 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 1505

Working length: 61 in
Plate thickness (max.) - 450 N/mm²: 0,197 in
KMT RNC 2004 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 2004

Working length: 81 in
Plate thickness (max.) - 450 N/mm²: 0,157 in
KMT RNC 3004 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 3004

Working length: 120 in
Plate thickness (max.) - 450 N/mm²: 0,157 in
consultation

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

KMT RNC 2504 - Sliding block guided motorized plate shears with NC-controlled back gauge
KMT RNC 2504
SKU : 133627
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a service

*
*
*
*
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our service representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.