UWF 3.2 - With universal type milling head, automatic feed on all axis, swiveling table and horizontal spindle
UWF 3.2 - With universal type milling head, automatic feed on all axis, swiveling table and horizontal spindle

UWF 3.2

SKU : 362695

The versatile universal milling machine complements the tried and tested UWF 3. Both models have the large work area, the universal milling head and the horizontal spindle in common. The new UWF 3.2. however has a slightly higher speed range and an infinitely variable servomotor feed, which extends its range of application. Together with the extensive equipment, this model is also ideally suited for repair workshops as well as training and production departments.

  • Universal cutter head swivels on 2 levels
  • Outer arbor support for horizontal milling
  • Swiveling milling table
  • Servo-feed on all axes with rapid feed
  • Extensive standard equipment
Working Area
Table set up area 54 in x 13 in
Table load capacity (max.) 572 lbs
Table swivel range r/l 45 deg
Number of T-slots 3 positions
T-slot (width x spacing) 0.55 in x 3.15 in
Travels
Travel X-axis 39.4 in
Travel Y-axis 14 in
Travel Z-axis 16 in
Vertical Milling Head
Spindle speed (vertical) 45 rpm - 1660 rpm
Spindle mount SK 40 DIN 2080
Throat 12 in - 30 in
Vertical spindle-to-table surface distance 10.24 in - 25.98 in
Milling head swivel range 360 deg
Rapid Feed
Rapid feed X-/ Y-axis 53 in/min
Rapid feed Z-axis 39.37 in/min
Horizontal Milling Spindle
Spindle speed (horizontal) 35 rpm - 1500 rpm
Spindle mount SK 40 DIN 2080
Horizontal spindle-to-table surface distance 3 in - 19 in
Feed
Feed speed X-axis 1.1811 in/min - 32.6771 in/min
Feed speed Y-axis 1 in/min - 33 in/min
Feed speed Z-axis 0.9055 in/min - 24.6063 in/min
Drive Capacity
Motor rating horiz./ vert. 4 Hp
Measures and Weights
Overall dimensions (length x width x height) 75 in x 69 in x 79 in
Weight 4290 lbs

  • Extremely rigid machine bed made of high-strength HT-200 cast-iron with heavy ribbing
  • Large rectangular guideways ensure precision and quiet operation within permissible high loads
  • Precision-ground guideways with hardened surfaces for long term accuracy and wear resistance
  • The milling table features a large setup area and can be rotated in linear direction
  • Quiet, precision-made headstock gears with hardened and ground gears
  • Universal cutter head swivels on 2 planes - quick change-over from horizontal to vertical machining
  • By combining both swivel levels, almost any angle can be set
  • Standard outer arbor support with bronze plain bearings accommodates long milling arbors in the horizontal spindle
  • Powerful servo-motor for infinite variation of feeds in all 3 axes
  • Minimum downtime due to rapid positioning of work table and rapid feeds in all axes
  • Control panel swivels for comfortable operation
  • Coolant system and chip tray are included

3-axis position indicator X.Pos 3.2 SKU:
  • New generation position indicator with integrated turning functions
3-axis position indicator X.Pos 3.2
3-axis position indicator X.Pos 3.2 SKU:
  • New generation position indicator with integrated turning functions
Collet chuck with collets (0.16",0.2",0.24",0.31",0.39",0.47",0.55",0.63" diam.)
Collet chuck with collets (0.16",0.2",0.24",0.31",0.39",0.47",0.55",0.63" diam.) SKU:
Horizontal milling arbor, 27 mm diam.
Horizontal milling arbor, 27 mm diam. SKU:
Outer arbor support for horizontal milling
Outer arbor support for horizontal milling SKU:
Chip tray
Chip tray SKU:
Coolant system
Coolant system SKU:
Central lubrication
Central lubrication SKU:

Mounted behind the bridge, this unit ensures automatic central lubrication, which minimizes service requirements and greatly increases machine reliability

M16 draw bar
M16 draw bar SKU:
LED work lamp
LED work lamp SKU:
Operating tools
Operating tools SKU:
Operator instructions
Operator instructions SKU:

Resources & Downloads

Optional Accessories

Explore the range of compatible accessories in stock

Collets & Chucks ER 40 Collet Set 15 pcs.
SKU : 106075
Vises HS 125 Hydraulic machine vise
SKU : 125024
Milling Arbors & Milling Chucks Shell End Milling Arbor Ø22 SK 40
SKU : 103900
Installation, Assembly Pivoted Mounts LK 5
SKU : 103331
Clamping Kits Clamping Tool Set De Luxe 14/M12
SKU : 105295
Drill Chucks Drilling accessory set, ST 40, DIN 2080, 5 pieces
SKU : 104596
Collets & Chucks ER 40 Collet Chuck / Mount ISO 40
SKU : 106062
Oil, Coolants and Lubricants Coolant Concentrate 5 Ltr.
SKU : 103184
Drilling Tools Universal Facing / Lathe Bore Head ADA / SK40
SKU : 103404
Milling Arbors & Milling Chucks Shell End Milling Arbor Ø16 SK 40
SKU : 103895
Milling Arbors & Milling Chucks Shell End Milling Arbor Ø27 SK 40
SKU : 103905
Milling Arbors & Milling Chucks Shell End Milling Arbor Ø32 SK 40
SKU : 103910
Milling Arbors & Milling Chucks Shell End Milling Arbor Ø40 SK 40
SKU : 103915
Vises Machine vise with pull-down system NZM 160
SKU : 104920
Clamping Kits Swivel Hold-Down Clamp Set 100/M12
SKU : 105790
Collets Angle Collet Fixture (vertical + horizontal)
SKU : 106090
Collets 5-C-Collet Clamp-Ø 0.04 in
SKU : 106103
Collets 5-C-Collet Clamp-Ø 0.08 in
SKU : 106104
Collets 5-C-Collet Clamp-Ø 0.12 in
SKU : 106105
Collets 5-C-Collet Clamp-Ø 0.16 in
SKU : 106110
Collets 5-C-Collet Clamp-Ø 1 in
SKU : 106215
Inspection Gauges Edge Tracer Set
SKU : 108057
Milling Cutter Tools Roughing End Mill Cutter 40
SKU : 108400
Milling Cutter Tools Roughing End Mill Cutter 50
SKU : 108401
Milling Cutter Tools Roughing End Mill Cutter 63
SKU : 108402
Milling Cutter Tools Roughing End Mill Cutter 80
SKU : 108403
Milling Cutter Tools End Milling Set HSS TiN
SKU : 108440
Milling Cutter Tools Roughing Shank Cutter 10 pcs.
SKU : 108445
Drilling Tools Lathe Bore Head with Boring Bar Set 3 in 12 pcs.
SKU : 108633
Drilling Tools Mounting Shank for reaming head 1.97/2.95" EN ISO 40
SKU : 108637
Other Assembly Stand SK 40
SKU : 108930
Dividing Heads Divider ST 130
SKU : 110960
Dividing Heads Optional Accessory Set / ST 130
SKU : 110970
Chip Removal Power Worker Metal Cutter
SKU : 123040
Tables Rotary Table RT 200
SKU : 125835
Vises Corrugated Parallel Parts 0.4-0.9 in
SKU : 128960
Vises Corrugated Parallels 1-1.5 in
SKU : 128961
consultation

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

UWF 3.2 - With universal type milling head, automatic feed on all axis, swiveling table and horizontal spindle
UWF 3.2
SKU : 362695
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a service

*
*
*
*
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our service representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.