KMT RNC 2004 - Sliding block guided motorized plate shears with NC-controlled back gauge
KMT RNC 2004 - Sliding block guided motorized plate shears with NC-controlled back gauge
new

KMT RNC 2004

SKU : 133626

This model is part of the KMT RNC series and is an advanced, precision-machined plate shearing machine with premium components. It features a powerful drive for superior cutting performance. The rigid construction with sliding-block guided cutter bar and a straight cutting angle enables cuts with minimal torsion in the workpiece. The kerf can be adjusted manually, and back gauge positioning is NC-controlled. Handling plate sections is simplified enormously by the integrated Return-to-Sender function.

  • Solid steel weldment with sliding block guide
  • NC-controlled back gauge can be easily programmed
  • Automatic, semi-automatic, and manual modes
  • Cutter for stainless steel machining included
  • Reversible cutters with multiple cutting surfaces
  • Adjustable kerf
  • Return-to-Sender function
Working area
Working length 2060 mm
Cutting angle 1,3 deg
Work table height 880 mm
Work table depth 455 mm
Number of support arms 2 positions
Support arms 1000 mm
Strokes per minute 31 H/min
Back Gauge
Rear stop 750 mm
Cutting Capacities
Plate thickness (min.) - 450 N/mm² 0,2 mm
Plate thickness (max.) - 450 N/mm² 4 mm
Plate thickness(max.) - 700 N/mm² 2 mm
Drive capacity
Motor rating main drive 7,5 kW
Measures and weights
Overall dimensions (length x width x height) 2,7 m x 2,35 m x 1,4 m
Weight 3100 kg

Machine Frame

  • The machine frame is made of a very rigid, solid steel weldment and the cutter bar is sliding-block guided
  • The high-precision guide ensures clean cuts and special cutters for machining stainless steel plates are included
  • The upper cutters are reversible for use of both sides, and the lower cutters feature 4 cutting edges
  • A rigid, continuous hold-down fixes the sheet metal plate right in front of the cut line
  • The optimum kerf for machining can be adjusted manually

Ergonomic Design

  • The “Return-to-Sender” function is an innovative plate shears feature that returns the cut off metal sheet automatically back to the operator position. This function provides increased process efficiency and operator safety
  • The rigid side angle stop simplifies precise alignment of the plate perpendicular to the cut line
  • Rugged support arms ensure a strong hold of large plates
  • Material support rollers are recessed in the table to simplify workpiece handling and avoid scratches on the workpiece
  • The mobile foot switch gives the operator added flexibility and both hands are free for handling the workpiece
  • The bright LED illumination of the cut line creates a clearly visible shadow on the marked line
  • Additionally, the smart machine enclosure design allows vertical view from the top for exact workpiece alignment
  • All lubrication points and adjustment screws are easily accessible to simplify regular maintenance

Rear stop:

  • The motorized back gauge ensures precise positioning in automatic, semi-automatic and manual mode
  • The NC-controlled back gauge can be easily and quickly programmed
  • The easy accessible work area at the back gauge is secured by light curtain

Equipment

  • High-quality electric components ensure reliable operation and maximum availability
  • The full machine enclosure provides maximum safety, features a practical design and is precision machined

BRL NC controller SKU:
BRL NC controller
BRL NC controller SKU:
Cutting unit counter
Cutting unit counter SKU:
Cutting line lightning & shadow illumination
Cutting line lightning & shadow illumination SKU:
Finger protection cages
Finger protection cages SKU:
Rear safety covers with photocell
Rear safety covers with photocell SKU:
Bottomblade with 2 cutting sides+upper blade with 4 cutting sides
Bottomblade with 2 cutting sides+upper blade with 4 cutting sides SKU:
Foot switch with emergency stop switch
Foot switch with emergency stop switch SKU:
Squaring arm with T slot, stoper and ruler
Squaring arm with T slot, stoper and ruler SKU:
Front sheet holding arms (solid rectangular type)
Front sheet holding arms (solid rectangular type) SKU:
Motorized rear stop (750 mm)
Motorized rear stop (750 mm) SKU:
Manual cutting gap adjustment
Manual cutting gap adjustment SKU:
Manual return to sender
Manual return to sender SKU:
Table with ball transfer
Table with ball transfer SKU:
Operator instructions
Operator instructions SKU:
Additional blade set for 2,000 mm cutting length
Additional blade set for 2,000 mm cutting length SKU: 254193
Additional blade set for 2,000 mm cutting length
0-180°Angular Shearing Device SKU: 254196
0-180°Angular Shearing Device
Upgrade from 750 to 1000 mm NC controlled backgague SKU: 254197
Upgrade from 750 to 1000 mm NC controlled backgague
Squaring arm extension to 2.000 mm SKU: 254198
Squaring arm extension to 2.000 mm
Front arm 2.000 mm per piece SKU: 254201
Front arm 2.000 mm per piece
Pneum. Sheet holding device with reset function SKU: 254203
Pneum. Sheet holding device with reset function
Upgrade to Fuji controller SKU: 254204
Upgrade to Fuji controller

Resources & Downloads

Similar Products

new
KMT RNC 1505 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 1505

Working length: 1.560 mm
Plate thickness (max.) - 450 N/mm²: 5 mm
new
KMT RNC 2504 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 2504

Working length: 2.560 mm
Plate thickness (max.) - 450 N/mm²: 4 mm
new
KMT RNC 3004 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 3004

Working length: 3.060 mm
Plate thickness (max.) - 450 N/mm²: 4 mm
new
KMT RNC 1505 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 1505

Working length: 1.560 mm
Plate thickness (max.) - 450 N/mm²: 5 mm
new
KMT RNC 2504 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 2504

Working length: 2.560 mm
Plate thickness (max.) - 450 N/mm²: 4 mm
new
KMT RNC 3004 - Sliding block guided motorized plate shears with NC-controlled back gauge

KMT RNC 3004

Working length: 3.060 mm
Plate thickness (max.) - 450 N/mm²: 4 mm
consultation

Need help finding a machine?

We will gladly assist you in making the right decision to achieve your business goals

Service by KNUTH

All machines need an occasional pit stop. With our all-encompassing plans for service, training and installation you always will get the best possible performance from your KNUTH machines.

View Services

See KNUTH Machines in action

Get a first-hand impression at one of our facilities! Many machines in our portfolio are always in stock and available for demonstration.

Book a Demo

Request a quote

KMT RNC 2004 - Sliding block guided motorized plate shears with NC-controlled back gauge
KMT RNC 2004
SKU : 133626
*
*
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Explore more machines Book a demo for this machine
Something went wrong

Please refresh the page and try submitting the form again.

Request a Consultation

*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our sales representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.

Request a service

*
*
*
*
*
*
*
*
*
*
*
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Request timed out, please submit the form again
Thank You!

We have received your request and appreciate your interest! Our service representative will get in touch within 1 business day.

Something went wrong

Please refresh the page and try submitting the form again.